When it comes to hardwood floor refinishing, homeowners should know that planning and patience and skill won’t be enough as they ought to have specialized equipment as well. Out of all the home improvement projects that homeowners can undertake, this one is something that requires research, knowledge and time. You’ll go through many steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors.
In any of the said steps or stages, just a slight touch of error is more than enough to lead to problems that may last for long. Yes, you can refinish the entire hardwood flooring alone but, it is wise that you get some help at some parts. It will take around 1 to 3 weeks to carry out refinishing for this kind of flooring.
Step 1. Checking the hardwood floor – it is your job to determine whether or not the hardwood floor planks is a laborious process. You have to assess if the floor suffered from water, pet urine or spills. In an effort to see if the boards are very thin to be sanded, you can pull up one threshold of the door. You additionally need to find out if the last sealant was varnish, wax or polyurethane. You have to examine the hardwood flooring to be able to see if they have deep gouges or dramatic wear patters.
The Beginner’s Guide to Options
Step 2. Preparing the flooring – just before you perform hardwood floor refinishing, you’ve got to prepare the floor first. If most hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant, you’re ready to start with the preparation.
The Best Advice About Floors I’ve Ever Written
First thing that you’ve got to do is clean the whole floor area. It is vital as well to file holes from nails, staples or scrapes. You need to pull up the thresholds as well as the baseboards too. You need to do all the floors to keep it consistent even if one of the floors not looks good.
Step 3. Sanding – this is probably the most daunting and the most demanding step that you would ever do. You’ll have to rent a drum sander equipment, it’s loud to use and you have to roll it on the entire hardwood flooring 3x to be able to peel off the top layer of the finish.
Step 4. Staining and sealing – just before you start with this step, you must ensure that every bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications. You need to seal it with thin layer of sealant to be certain that the stain is dry before application once you are done staining the flooring.